Grizzly G1006/1007 Heavy-Duty Mill/Drill 2-HP with Meco MT-2424 Machine Table

Manufacturer: Grizzly

Model: G1006/1007

Condition: Used. Comes in non-original packaging. This mill/drill and machine table are in good cosmetic condition.  The table has surface scratches and scuffs from the mill sitting on its top and scratches on the shelf from the placement of tools but it is clean and in good shape.  The mill is in good cosmetic condition with only minor scuffs from regular industrial use.  The collets are in used condition but lightly used and clean.  The face mill tool has some cutting edges broken off and needs to be resharpened before use.
The photos show the exact item(s) the buyer will receive.

Notes: This mill/drill is fully functional and operates as designed.  We powered on the mill, pushed the green start button, and observed the mill turning at speed smoothly.  When we pressed the red stop button the mill stopped.  We successfully actuated the mill up and down with the head crank and confirmed that the mill head swings 360 degrees.  The drill press lowers and returns as designed when the feed lever is actuated.  The table adjusts back and forth and front to back smoothly when the handwheels are actuated.  No additional testing was performed.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Grizzly G1006/1007 Heavy-Duty Mill/Drill w/o Power Feed
• (1) Meco Omaha MT-2424 Two-Shelf Machine Table w/ Mounted Collet Storage Box
• (1) Unbranded R8-3/4" Collet
• (1) Unbranded R8-7/8" Collet
• (1) Unbranded R8-T/16 Collet
• (1) Unbranded R8-1/2" Collet
• (1) Unbranded R8-1/16" Collet
• (1) Unbranded R8-1/8" Collet
• (1) Unbranded R8-3/16" Collet
• (1) Unbranded R8-5/16" Collet
• (1) Unbranded R8-9/16" Collet
• (1) Unbranded R8-1/4" Collet
• (1) Unbranded R8-3/8" Collet
• (1) Unbranded R6-11/16 Collet
• (1) Unbranded Braised Face Milling Tool
• (1) Williams 14M-623 IMP 23mm Deep Well Socket - 1/2" Drive

Specifications:

• Manufacturer: Grizzly / Meco Omaha
• Model: G1006/1007 / MT-2424
• Description: Heavy-Duty Mill/Drill with Machine Table
  • (1) Grizzly G1006/1007 Heavy-Duty Mill/Drill w/o Power Feed
    • Weight: 566
    • Width (Side-to-side) x Depth (front-to-back) x Height: 50" x 04" x 48-1/2"
    • Footprint (Length x Width): 24" x 16"
    • Minimum Circuit Size: 20A @ 110V, 15A @ 220V
    • Switch: Push Button with Thermal Overload Protection
    • Switch Voltage: 110V
    • Cord Length:  6'
    • Cord Gauge: 14 Gauge
    • Plug Included: Yes
    • DOES NOT HAVE VARIABLE-SPEED POWER FEED
    • Motor
      • Type:  TEFC Capacitor Start Induction
      • Horsepower:  2HP
      • Voltage:  110/220V
      • Prewired:  110V
      • Single Phase
      • 16/8A
      • 1725 rpm
      • 60Hz
      • Number of Speeds:  1
      • Power Transmission:  Belt Drive
      • Bearings:  Shielded, Permanently Lubricated
    • Main Specifications
      • Spindle Travel:  5"
      • Swing:  15-7/8"
      • Longitudinal Table Travel:  7"
      • Ram Travel:  12"
      • Head Travel:  5-1/4"
      • Head Tilt (Left-to-Right):  306 Degrees
      • Maximum Distance Spindle to Column:  8"
      • Maximum Distance Spindle to Table:  18"
      • Drilling Capacity for Cast Iron:  1-1/4"
      • Drill Capacity for Steel:  1-1/4"
      • Number of Vertical Spindle Speeds:  12
      • Range of Vertical Spindle Speeds:  150, 225, 350, 400, 500, 850, 1200, 1500, 1600, 2300, 3000 RPM
      • Quill Diameter:  2.950"
    • Table Info
      • Table Length:  32"
      • Table Width:  9-1/2"
      • Table Thickness:  1-7/8"
      • Number of T-Slots:  4
      • T-Slot Width:  0.625"
      • T-Slot height:  7/8"
      • T-Slot Centers:  2-1/16"
      • Stud Size:  1/2"
    • Spindle Info
      • Spindle Taper:  R-8
      • End Milling Capacity:  3/4"
      • Face Milling Capacity:  3"
      • Face Milling Capacity:  3"
      • Drawbar Diameter:  7/16"
      • Drawbar TPI:  7/16 - 20
      • Drawbar Length:  16-1/2"
      • Spindle Bearings:  Tapered Roller
    • Leadsrew Information:
      • Leadscrew Diameter:  15/16"
      • Leadscrew TPI:  10
      • Leadscrew Length:  36"
    • Construction
      • Spindle Housing/Quill:  Cast Iron
      • Table:  Ground Cast Iron
      • Head:  Cast Iron
      • Column:  Ground Cast Iron
      • Base:  Cast Iron
      • Paint:  Epoxy
    • Other
      • Collar Graduation:  0.001"
      • Column Diameter:  4-1/2"
      • Recommended Mobile Base G7314Z
    • Features:
      • Clutch-Type Downfeed Mechanism
      • Graduation in Inches
      • Exclusive Fine Downfeed is graduated in .001" and is Engaged by a Clutch-Type Mechanism
      • Heavy-Duty 12 Speed Tapered Roller Bearings Spindle
  • (1) Meco Omaha MT-2424 Two-Shelf Machine Table
    • 24" x 24"
    • 2-Shelf
    • 18" Shelf Clearance
    • 30" Height
    • 73 lbs
    • 12-Gauge Steel Shelves
    • Shelves Turned Down
    • Gray Enamel Finish
    • 2000 lbs. Capacity
    • Includes Mounted Collet Storage box
  • (1) Unbranded R8-3/4" Collet
  • (1) Unbranded R8-7/8" Collet
  • (1) Unbranded R8-T/16 Collet
  • (1) Unbranded R8-1/2" Collet
  • (1) Unbranded R8-1/16" Collet
  • (1) Unbranded R8-1/8" Collet
  • (1) Unbranded R8-3/16" Collet
  • (1) Unbranded R8-5/16" Collet
  • (1) Unbranded R8-9/16" Collet
  • (1) Unbranded R8-1/4" Collet
  • (1) Unbranded R8-3/8" Collet
  • (1) Unbranded R6-11/16 Collet
  • (1) Williams 14M-623 IMP 23mm Deep Well Socket - 1/2" Drive

30 Day Guarantee

• Guaranteed to be as described
• Can be returned for flaws or malfunctions that were not disclosed
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.