Description

Manufacturer: Unbranded

Model: Standalone

Condition: New Other. This unit is in Fair cosmetic condition. There is some wear in a couple of places on top of the conveyor base, a few spots where paint is scratched under the control panel, some scratches in black plastic around the HMI, and the wire loom is falling down inside from the adhesive that held up the little clips, not holding up any more.
The photos show the exact item(s) the buyer will receive.

Notes: We were able to run the conveyor in both directions, run the width adjustment both directions, operate the grippers and stops, and verify operation of all product sensors. We used 120V power for testing and found the unit functional but can't guarantee it will work on other than 200-230V power. We noted the computer has an internal clock set at 2006, which may mean the BIOS battery has died. NO other testing was done.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

(1) 1m Open-Center Edge Belt Conveyor

Specifications:

Open-center edge-belted conveyor
1m total length
Right-to-Left or Left-to-Right
Manual and motorized width adjustment, 13 to 57cm center opening between belt edges
1" Wide cloth-topped belts
Belts are gear driven by step motor Beckhoff AS1060-1000
Width adjustment driven by step motor Beckhoff AS1050-0110
Dual linear rails (52cm long), CPC MR9M bearings and dual screws for width adjustment
Engraved scale shows belt opening width
Optical switches on both sides of width adjustment range, looks like could be set as narrow as 10cm, wide as 63 cm
Pneumatic product stop "Grippers/Tray Lock" cylinders on both sides, (Festo DFM-20-20-P-A-GF) have no fingers to grip products
Tray locks have autoswitches for up and down
Stop pin with 10mm stroke interrupts product flow (Festo ADVC-10-10-A-P-A)
(3) optical product sensors, Sick WTB2S-series
Entire conveyor assembly has a flat bottom plate, simple to remove/ integrate in your setting
Approximately 15.5cm from bottom of plate to top of conveyor belts
Controlled by Beckhoff CX9020-0115/U900 industrial PC with Windows 7
User-friendly user interface
HMI is a color touch screen Beckhoff CP2907
Festo pneumatics
Large opening under conveyor
Base cabinet contains electronics, otherwise empty
Power requirement: 200-230V 1phase 50/60Hz 1.2kW
Wheels for easy relocation, adjustable legs

Unused old stock, minor "shelf wear"

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

View AllClose

Warranty Information

30-Day Guarantee

Items can be returned for any reason within 30 days of delivery.
Buyers must notify Dougdeals in writing within this period to initiate a return.
Returns must be authorized by Dougdeals and include an assigned RMA (Return Merchandise Authorization) number.
Authorized returns must be received by Dougdeals within 21 days of return authorization.

Return Shipping and Refunds

If the return is due to seller error (e.g., wrong item sent, defects not described, inauthenticity), DougDeals will cover the return shipping costs and process a complete refund, including the original shipping charges, within two business days of receiving the returned item.
If the return is due to buyer error (e.g., wrong part ordered, compatibility issues, no longer needed, found a better price), the buyer is responsible for:
- Safe return shipping.
- Return shipping costs.
- Any loss or damage during return transit.

Exclusions and Limitations

Replacement or substitute items may be provided at Dougdeals’ discretion instead of a refund.
Returned items must be in the same condition as when sent and include all components.
There is no restocking fee, but Dougdeals reserves the right to deduct costs from refunds for altered or damaged items.
Items returned due to seller error that are found to be accurately described will have return shipping deducted from the refund.
Original shipping charges are non-refundable for orders shipped internationally or to U.S. territories, Alaska, or Hawaii.

Shipping and Responsibility

International and expedited shipping costs, import fees, calibration fees, and testing fees are the buyer’s responsibility.
Any damage occurring during transit via Dougdeals-arranged third-party services or Dougdeals employee delivery must be noted in writing on the delivery receipt at the time of delivery. Failure to do so will result in the buyer assuming responsibility for damage claims.
Dougdeals is not liable for loss or damage during transit via buyer-arranged shipping services.
Customs, duties, taxes, brokerage fees, and all import-related costs for international shipments are the buyer's responsibility.

Contact Us

Headquarters:
CDN Systems | DougDeals
12510 Trails End Rd.
Leander, TX 78641

Contact via phone:
Toll free: 877-328-9236
Main office: 512-933-0081
Local Craigslist: 512-913-6048
Local eBay: 512-999-3894
Fax: 512-873-0745

Contact online:
Sales inquiries: sales@dougdeals.com
Craigslist and local sales: local@dougdeals.com
Customer support: support@dougdeals.com