Bachmann Electronic CM202 Controller Area Network CANopen Master Module

SKU:
Y31S021
Shipping:
Calculated at Checkout
  • Bachmann Electronic CM202 Controller Area Network CANopen Master Module
  • Bachmann Electronic CM202 Controller Area Network CANopen Master Module
  • Bachmann Electronic CM202 Controller Area Network CANopen Master Module
  • Bachmann Electronic CM202 Controller Area Network CANopen Master Module
  • Bachmann Electronic CM202 Controller Area Network CANopen Master Module
$174.99

Description

Manufacturer: Bachmann Electronic

Model: CM202

Condition: Used. Comes in non-original packaging. This module is in good condition with minor scuffs and scratches from previous use.
The photos show the exact item(s) the buyer will receive.

Notes: The module was hooked up to 24VDC and went through its startup-config. Lights on the unit came on to indicate that it was properly functioning. No further testing was performed.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

  • (1) Bachmann Electronic CM202 Controller Area Network CANopen Master Module

Specifications:

  • Manufacturer: Bachmann Electronic
  • Model: CM202
  • Description: Controller Area Network CANopen Master Module
  • System Integration
    • Max. number 4 per M1 controller
    • Number of CAN buses 2 per module, 8 per M1 controller
    • Max. Anzahl Adressen 127 per network
    • Protocol CANopen, SAE J1939, NMEA 2000
    • Current consumption 320 mA / 5 VDC
  • CAN interface
    • Baud rate 10 k to 1 Mbaud
    • Bus length Max. 5000 m
    • Connection 2x 9-pin D-Sub female connectors
    • Pin assignment By CiA DS 102 / 4
    • Signal level By CiA DS 102 / 4
    • Galvanic isolation from the system 500 V
  • CANopen
    • CANopen master Yes
    • CANopen slave Yes
    • Extended boot-up No
    • Minimum boot-up Yes
    • Configuration SolutionCenter configurator creates DCF from EDS files
    • Process data Max 128 TxPDOs + 128 RxPDOs per network
    • Variable PDO mapping Yes
    • PDO transmission modes Value change with inhibit time; cyclic or acyclic synchronous; RTR
    • Process data access PLC process image, PLC function blocks, C/C++ functions
    • Service Data (SDO) access PLCopen function blocks, C/C++ functions, Simulink blocks
    • Graphical monitor in SolutionCenter
    • Emergency messages NMT slave is producer, NMT Master is consumer
    • Emergency message access Access to message list via function blocks, C/C++ function;
    • Graphical monitor in SolutionCenter
    • Network monitoring Heartbeat and/or node guarding with individual limits per node


Hassle Free Returns

  • DougDeals will pay return shipping if the item needs to be returned for any reason
  • Return window is 30 days from delivery date
  • See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

View AllClose

Additional Information

Condition:
Used
View AllClose