Beckman Optima TLX Ultracentrifuge 120,000RPM Not Spinning - Parts

SKU:
X06D003
Shipping:
Calculated at Checkout
  • Beckman Optima TLX Ultracentrifuge 120,000RPM Not Spinning - Parts
  • Beckman Optima TLX Ultracentrifuge 120,000RPM Not Spinning - Parts
  • Beckman Optima TLX Ultracentrifuge 120,000RPM Not Spinning - Parts
  • Beckman Optima TLX Ultracentrifuge 120,000RPM Not Spinning - Parts
  • Beckman Optima TLX Ultracentrifuge 120,000RPM Not Spinning - Parts
$1,499.99

Description

Manufacturer: Beckman

Model: TLX

Condition: For Parts or Not Working. This centrifuge is in Fair cosmetic condition. It has lots of minor scuffs/scratches from prior use, especially on the sides.  The left side of the top cover has a pair of broken bolt holes.  The inside of the chamber looks pretty clean.  The door of the chamber door has two spots with black goo, we think from a pair of pads disintegrating somewhere under the machine's top cover. This pump had a few notes with it, showing that it received service for its vacuum and diffusion pump oils as well as vacuum hose in 2002 and TLX1Z0 ICB repair/update in 2009

The photos show the exact item(s) the buyer will receive.

Notes: This ultracentrifuge is NOT working properly.  The motor will not spin, but the control panel gives a flashing "DRIVE" indication instead.  We are not sure why.  The refrigeration system cools to 2ºC without difficulty, and the vacuum system pumps down.  Pressing "enter, 4, 1, 1, enter" shows a vacuum reading that falls from 10,000 to 0 in a couple of minutes.  The VAC light goes out soon after power-on.  When the rotor is spun by hand, a speed indication shows up on the screen.  No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

  • (1) Beckman Optima TLX Ultracentrifuge

Specifications:

  • Manufacturer: Beckman Spinco Division
  • Model: TLX
  • Optima series ultracentrifuge
  • Cat. No.: 361545
  • Speed rating: 5,000 to 120,000 RPM
  • Digital speed, temperature, and time displays
  • Temperature range: 2 to 40 ºC
  • Solid-state refrigeration (uses no refrigerant except air)
  • Mechanical and diffusion vacuum pumps inside for 10 micron chamber pressure
  • Power: 120V 12A 60Hz
  • Manual or programmed operation
  • Programmable acceleration/deceleration
  • Compatible with TL-series Beckman rotors
  • Chemical-resistant chamber is reinforced for safety
  • Air-cooled direct drive induction motor has no belts, gears, or brushes
  • NOT WORKING sold AS-IS!

Everything works except the actual spinny bits :(

AS-IS

  • No returns - No refunds - No exchanges
  • By purchasing this item, you are agreeing to not seek reimbursement should the item not function to the manufacturer's specifications.
  • Read the notes carefully to ensure you are buying something you can use
  • See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

View AllClose

Additional Information

Condition:
For Parts or Not Working
View AllClose