ControLaser CL1064-500 1064nm 500mW IR DPSS Laser Head & Driver w/ LST18 Shutter

Manufacturer: CrystaLaser

Model: CL1064-500

Condition: Used. Comes in non-original packaging.  These items are in Good cosmetic condition.  This lot was removed as a set from a DCG Ruby measuring system, and some components are included which may not be useful to you - but they would otherwise be recycled so we include them in case you may want the shutter, fan, fiber connector, etc.  Note the laser safety labels list several wavelengths this unit does not produce, we are pretty sure it's a standard warning label for this form factor.  The included keyswitch has a jumper you can put in place of the key for maintenance or troubleshooting purposes.  You can wire it into your system, in line with the shutter or the interlock if you like, or leave it out.
The photos show the exact item(s) the buyer will receive.

Notes: This lot is in Good working condition as far as we can test.  When everything was wired up to make it work temporarily on our bench, the lights on the control board lit up indicating the laser is on.  Our IR detection card showed a bright dot where the laser hit ... and the reverse of the card immediately started giving a little white wisp of smoke and visibly charring when exposed to the beam (inset, top/right of photo #2).  We are not equipped to measure output power.  The fan runs.  When the shutter was given 12V separately, the aperture opened with around 0.1A of current input.  The power switch works.  The mechanical shutter on the laser head works.  No other testing was done.

Please NOTE: This is an industrial setup, and will require additional mounting, wiring, and enclosure provisions to render it safe!
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) CrystaLaser CL1064-500-DCG-SL Laser Head
• (1) CrystaLaser CL1064-500-DCG-SL Laser Driver
• (1) NM Laser Products LST18 Shutter
• (1) XP Power ECM60US12 Power Supply
• (1) Switch/Jumper harness
• (1) Orion OD6015-12HB Fan

Specifications:

• Manufacturer: CrystaLaser LC
• Model: CL1064-500-DCG-SL
• DPSS Solid state laser, CW
• Wavelength: 1064 nm
• Output power: 500 mW
• With mechanical shutter on laser head AND separate powered shutter
• Fiber coupler has goniometric adjustability
• Laser crystal: Nd:YAG/Nd:YVO4
• Polarization: 100:1, horizontal linear polarization
• Warm-up time: < 1 minute
• Typical power consumption: 10 Watts
• Head dimensions: 30 mm square 120 mm long, on 50 mm wide mounting plate
• Single longitudinal or spectral mode
• Low noise version
• Marked as class IIIb, 500mW
• Fan and two switches if necessary for your application
• power input: IEC-320-C14  (the common power cord everything uses)
• Power supply has universal input 100-240V 50/60Hz 1.5A
• Powered shutter, runs off 12V DC
• Manufactured in 2012

Hassle Free Returns

• DougDeals will pay return shipping if the item needs to be returned for any reason
• Return window is 30 days from delivery date
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.