Dorner 2200 3.4m Long Anti-Static Open-Center Edge Belt Conveyor 40cm Wide .75HP

Manufacturer: Dorner

Model: 220P-013

Condition: Used. This conveyor is in Good cosmetic condition; it looks as if it was never put into service, but there are various scuffs and scratches here and there on the outside. The plastic wire holding part on the bottom has several broken/missing side "teeth".

Please NOTE: there are no wires to any of the sensors or anything else, except the cable between the VFD and the motor it drives.

Please NOTE: there is a big sag along the span of this conveyor; you may want to add a third supporting leg in the middle, or limit the weight of your conveyed items! The photos show the exact item(s) the buyer will receive.

Notes: This conveyor appears to be new, and everything should work 100% once you get it all wired together.  We were not able to do any testing besides making sure the motor runs (when connected to our mains) and making sure the drive powers on and responds to button presses.  No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Dorner 220P-013 Open-Center Pallet/PCB Conveyor

Specifications:

• Manufacturer: Dorner
• Model: 220P-013
• 2200-series open-center conveyor
• Length: 340 cm
• Belt opening: 40cm wide
• Anti-static, low-friction timing type belts
• T-slot aluminum frame
• Adjustable leg height
• With (4) product sensors and cushioned accumulation stops
• Variable speed motor drive: Sew Movitrac MC07B0008-2B1-4-00
  • Input: 1phase AC 200-240V 50/60Hz 9.9A
  • Output: 3phase AC, 0V to mains voltage 0 to 599Hz
  • Motor power capability: to 1HP/0.75kW
  • Nominal current output: 4.2A
• Motor: Motovario T80-A4
  • 3/4 Horsepower
  • 3phase AC 208/230/460V 60Hz 1700 RPM 2.65/1.31A
  • IP55
  • Gearhead: Motovario NMRV 040 Ratio: 10, we think (not sure!)
• Separators: Asutec ASMNG-80-EW-08
• Separates workpieces or carriers on the conveyor
• Cushioned pallet stop (with damping)
• For use with masses up to 80kg (dependent on velocity)
• Enclosure: Rittal AX 1034.00 Compact Enclosure
• All sensors have NO wires.  You will have to figure out how to wire this up!
• There is NO PLC or other controller for the conveyor, only a motor drive!
• Manufactured in 2020

30 Day Guarantee

• Guaranteed to be as described
• Can be returned for flaws or malfunctions that were not disclosed
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.