Description

Watch Video

Video will open in a new window
Using the eBay App? Paste link into a browser window:

Manufacturer: Zmation

Model: Not Applicable

Condition: Used. This cell is in good working condition from a few feet away, but up close you will find scuffs/scratches and minor residues from prior use. It was in a lab at a major manufacturer and hardly ever used. The hours meter reads 96543, but the robot that was installed (a Denso 6-axis arm) had just over 1000 hours of running time! A few of the 1/4-turn fasteners to hold the sides on, don't fasten properly or are missing. All listed dimensions are approximate.

This cell was used with a 6-axis arm, but would work equally well for a SCARA, gantry, spider, or other type of system.

The photos show the exact item(s) the buyer will receive.

Notes: We watched the robot inside move around (see video; robot NOT included!) before dismantling the system. The doors open and close easily. The wheels roll very badly; it is better to use a pallet jack to move this. No other testing was done.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

(1) Zmation robot work cell
(1) Set of schematic drawings
(1) Key for the electrical boxes

Specifications:

Manufacturer: Zmation
Work cell for industrial robot arm
Approximately 1 meter cubic work volume
Shelves and enclosures for electronics
E-stops and main power switch installed
Heavy steel frame (1912 lbs)
Steel mounting plate for robot arm on top of cell
Aluminum plate in floor of cell, looks like Mic6
Size:
- Overall dimensions: 63" x 53" x 80" (plus 12" for the light tower)
- Large door: 76 x 98 cm
- Small door: 46 x 101 cm
- Openings opposite large door: 2x 27 x 66 cm
- All door openings are slightly obstructed by safety switches, lights, or plugs
- Open floor area: 103 x 101 cm
- Maximum floor area: 110 x 110 cm
- Aluminum floor plate: 123 x 123 cm
Floor to robot arm mount in ceiling: 101 cm
Features:
- 2 flat shelves
- 3 open-center slides for 17" wide equipment boxes
- 2 electrical enclosures
- 2 Emergency stop switches
- 2 sets of on/off switches
- Windows on all sides
- Lightweight removable plastic side panels with 1/4-turn fasteners
- Tower/stack light
- 3 pole main power switch and contactor
- 24V 2.3A DC power supply
- 3 Titan 65DR120 surge suppressors
- 3 STI TL4019 Safety Switches (1 is missing its key)
- Netgear JFS516 16-port Ethernet switch
- Furman Miniport-15 power relay
- Heavy-duty casters with retractable feet (doesn't roll well though)
- 1 shelf of DIN rails with wire terminals
- Lots of USB and network connection points
- Lots of convenience 110V outlet power strips
- Wired for 208/120V 3phase 30A electricity
Custom made for the previous owner in 2012

Ready to accept your controls and robotics, wired for power and e-stops!

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

View AllClose

Warranty Information

30-Day Guarantee

Items can be returned for any reason within 30 days of delivery.
Buyers must notify Dougdeals in writing within this period to initiate a return.
Returns must be authorized by Dougdeals and include an assigned RMA (Return Merchandise Authorization) number.
Authorized returns must be received by Dougdeals within 21 days of return authorization.

Return Shipping and Refunds

If the return is due to seller error (e.g., wrong item sent, defects not described, inauthenticity), DougDeals will cover the return shipping costs and process a complete refund, including the original shipping charges, within two business days of receiving the returned item.
If the return is due to buyer error (e.g., wrong part ordered, compatibility issues, no longer needed, found a better price), the buyer is responsible for:
- Safe return shipping.
- Return shipping costs.
- Any loss or damage during return transit.

Exclusions and Limitations

Replacement or substitute items may be provided at Dougdeals’ discretion instead of a refund.
Returned items must be in the same condition as when sent and include all components.
There is no restocking fee, but Dougdeals reserves the right to deduct costs from refunds for altered or damaged items.
Items returned due to seller error that are found to be accurately described will have return shipping deducted from the refund.
Original shipping charges are non-refundable for orders shipped internationally or to U.S. territories, Alaska, or Hawaii.

Shipping and Responsibility

International and expedited shipping costs, import fees, calibration fees, and testing fees are the buyer’s responsibility.
Any damage occurring during transit via Dougdeals-arranged third-party services or Dougdeals employee delivery must be noted in writing on the delivery receipt at the time of delivery. Failure to do so will result in the buyer assuming responsibility for damage claims.
Dougdeals is not liable for loss or damage during transit via buyer-arranged shipping services.
Customs, duties, taxes, brokerage fees, and all import-related costs for international shipments are the buyer's responsibility.

Contact Us

Headquarters:
CDN Systems | DougDeals
12510 Trails End Rd.
Leander, TX 78641

Contact via phone:
Toll free: 877-328-9236
Main office: 512-933-0081
Local Craigslist: 512-913-6048
Local eBay: 512-999-3894
Fax: 512-873-0745

Contact online:
Sales inquiries: sales@dougdeals.com
Craigslist and local sales: local@dougdeals.com
Customer support: support@dougdeals.com