Espec EZO30-EA 10-60C Temperature/Humidity Stability Environmental Chamber-Parts

Manufacturer: Espec

Model: EZO30-EA

Condition: For Parts or Not Working. This chamber is in Fair cosmetic condition. There are minor scuffs/scratches and some adhesive label residues on the stainless, and the paint outside has lots of small spots of corrosion and a few heavy scratches, but nothing that will affect function.  The rear top panel does not fit well, with a gap across the bottom.  The mount for the capacitor on the compressor is broken, so the capacitor sits on top of the chamber loose.  One of the wheels has its soft tire missing, so the chamber rocks slightly when pushed.  This is being sold AS/IS.  Note: We do not have the key for the door lock.
The photos show the exact item(s) the buyer will receive.

Notes: This chamber is in PARTIAL working condition. We were able to run it all the way to the maximum high temperature and humidity, with condensation running down the door.  We set minimum temperature and humidity, and it cooled 10º but the humidity only lowered slightly.  We found in later testing that it is able to increase the humidity, but NOT able to decrease humidity.  After the chamber had come to ambient temperature for a few hours, there was still a large area of condensation inside the door window.  The fan and refrigeration run relatively quietly. The door closes very securely, to the point of being hard to open. No other testing was done. We are not sure what-all may be wrong with this chamber, but we think the (expensive) humidity sensor may be faulty. This is being sold AS/IS.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Espec EZO30-EA Environmental Chamber

Specifications:

•  Manufacturer: ESPEC
• Model: EZO-EA
• Environmental Stability Chamber
• Suitable for ICH Q1A conditions:
  •  Long term: 25°C/60%, 30°C/65%
  •  Intermediate: 30°C/65%
  •  Accelerated: 40°C/75%
• Interior volume: 800 liters (28.1 cubic feet)
• Interior dimensions: 27.5" x 27.8" x 63.5"H
• Exterior dimensions: 34" x 40" x 94"
• Temperature range: 10 to 65 ºC
• Humidity range: 20% to 90% RH, temperature-dependent
• Power requirement: 208/230V 1-phase 4-wire 60Hz 24A
• Temperature fluctuation at sensor: +/-0.25 ºC
• Humidity fluctuation at sensor: +/- 2%
• Single-stage refrigeration
• Meets ICH Q1A general case guidelines for pharmaceutical stability testing
• Frost-free continuous refrigeration
• Heated full-view window
• Horizontal airflow
• (3) Adjustable solid shelves with lips to protect against spills
• Designed for flush installation on all sides
• Manufactured in 2013
• NOT working right, please read the testing notes!

AS-IS

• No returns - No refunds - No exchanges
• By purchasing this item, you are agreeing to not seek reimbursement should the item not function to the manufacturer's specifications.
• Read the notes carefully to ensure you are buying something you can use
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.