Eversys E'4 Steam Unit Module Stainless Steel Vessel + Heater Leaked - Parts

SKU:
X24D001
Shipping:
Calculated at Checkout
  • Eversys E'4 Steam Unit Module Stainless Steel Vessel + Heater Leaked - Parts
  • Eversys E'4 Steam Unit Module Stainless Steel Vessel + Heater Leaked - Parts
  • Eversys E'4 Steam Unit Module Stainless Steel Vessel + Heater Leaked - Parts
  • Eversys E'4 Steam Unit Module Stainless Steel Vessel + Heater Leaked - Parts
  • Eversys E'4 Steam Unit Module Stainless Steel Vessel + Heater Leaked - Parts
  • Eversys E'4 Steam Unit Module Stainless Steel Vessel + Heater Leaked - Parts
$218.29

Description

Manufacturer: Eversys

Model: DOES NOT APPLY

Condition: For Parts or Not Working. Comes in non-original packaging.  This steam module part is in Fair cosmetic condition.  The seals on the heater and lower/side connections failed, with water leaks and attendant buildup of residue around the openings.  The jacket is dirty and torn in places.  There is buildup on the heater elements.  The bottom of the frame is slightly bent upwards. The small-wires wiring harness has been cut.  The worst blemish is the buildup of crust around the heater opening, certainly due to the failure of the o-ring sealing the heater to the vessel. The photos show the exact item(s) the buyer will receive.

Notes: This was taken from a decommissioned system incorporating an e'4m machine and not tested separately.  We expect the pressure switch and temperature safety switches may not work due to corrosion.  The heaters both measured about 22 ohms.  Three of the temperature switches by the heater were closed-circuit, and one of the switches is open-circuit at room temperature.  No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

  • (1) Eversys Steam Module Vessel

Specifications:

  • Manufacturer: Eversys AG
  • Water/Steam boiler pressure vessel
  • Stainless vessel with fittings and frame, as shown
  • With insulating jacket
  • With heater and temperature limit switch assembly
  • With pressure gauge and switch
  • Without any additional items
  • Heater is marked: RICA R 7159361 101377 230V 2x2300W
  • Design pressure: 3.3 bar
  • Design temperature: 140 ºF
  • Volume: 5.6 liters


AS-IS

  • No returns - No refunds - No exchanges
  • By purchasing this item, you are agreeing to not seek reimbursement should the item not function to the manufacturer's specifications.
  • Read the notes carefully to ensure you are buying something you can use
  • See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.

View AllClose

Additional Information

Condition:
For Parts or Not Working
View AllClose