Fanuc a-0C Robocut CNC Wire-Cut Submerged EDM with 16-WC series NC Unit alpha

Manufacturer: Fanuc

Model: a-0C

Condition: Used. This equipment is in Fair cosmetic condition with the usual blemishes from prior use (scuffs/scratches/residues).  There are a few spots under the window in the work area with some visible rust.  The wetted parts have dark residues from use. The photos show the exact item(s) the buyer will receive.

Notes: This system is in Good working condition.  The previous owner said their only problem was the display was dim, so we replaced the entire LCD module including the backlight and backlight driver, with a new (old stock) display.  We are not able to test this machine. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Fanuc a-0C EDM
• (1) 16-WC NC unit
• (1) Fluid Unit
• (1) Water cooling unit
• (1) Wire collection box
• (1) Water filtration unit
• (1) pendant controller
• (4) spare water filters
• (1) Fanuc Robocut FRC a-0C Data Sheet
• (1) B-68794EN/01 Robocut a Series a-OC or a-1C Operator's Manual
• (1) B-68795EN/01 Robocut a Series a-OC or a-1C Maintenance Manual
• (1) B-68794EN-3/01 Automatic Wire Feed Mechanism Operator's Manual
• (1) B-65150E/04 AC Servo Motor a Series Parameter Manual
• (2) B-68796EN/01 Robocut a-0C Parts Manual
• (1) B-65165E/02 Servo Motor a Series Maintenance Manual
• (1) Intelligent EDM Getting to Know Your Fanuc wedm "learning the basics" booklet
• (1) Miscellaneous small spare parts

Specifications:

• Manufacturer: Fanuc
• Robot model: a-0C
• Type: A04B-0309-B001
• Robocut CNC wire-cut EDM
• NC unit: 16-WC series
• Submerged type
• With automatic wire feed
• Maximum workpiece dimensions: 650 x 420 x 170 mm
• Maximum workpiece weight: 165 kg
• Table stroke: 320 x 220 mm
• Z-axis stroke: 180 mm
• U and V axis stroke: 60 x 60 mm
• Maximum table feedrate: 900 mm/min
• Minimum table travel: 0.00001 mm
• Maximum taper angle: +/- 30º /80 mm
• Rapid traverse feedrate: 900 mm/min
• Cutting feedrate: 0.0001 to 50 mm/min
• Manual feedrate: 100, 200, or 300 mm/min
• Maximum workpiece thickness: 300 mm
• Maximum workpiece thickness for underwater wire feed: 100 mm
• Dielectric fluid unit capacity: 390 L demineralized water
• Fluid uint filtering flow rate: 40 L/min
• Power requirement: 208V 3phase 50/60Hz 13kVA plus compressed air
• Manufactured: 1996
• Visible part numbers:
  • A04B-0231-B213 Fanuc Robocut Alpha-C Series
  • A04B-0309-B001 Fanuc Robocut a-0C
  • Fanuc Series 16-W
  • A04B-0231-C223 Pendant Controller
  • A04B-0231-C231 Magnet Unit
  • A04B-0231-C217
  • A16B-1100-0550
  • A16B-1000-0400
  • A16B-1000-0390
  • Toshiba VFSX-2037B1Y-A11 Transistor Inverter
  • A06B-6081-H101 Servo Amplifier Module
  • A06B-6079-H201 Servo Amplifier Module
  • A06B-6080-H301 Servo Amplifier Module
  • A16B-2203-0090
  • A16B-1212-0871
  • A16B-3200-0210
  • A02B-0222-C091 9.5" LCD/MDI Unit
  • A16B-2300-0110
  • Fujitsu N860-3130-T002 Keyboard
  • Ebbco HR-930-QC1
  • A290-8024-V870 Vertical Wire Alignment Block
  • Ebbco Package Filtration System
  • Ebbco HRF-155-LP Hurricane Vessel
  • Ebbco EDM-D1-1 D.I. Exchange Vessel
  • A04D-0309-C003 Relay Panel
  • Ebara 32(25)VTP5/15-6.75 Pump
  • CKD A97L-0201-0585 Water Cooling Unit

30 Day Guarantee

• Guaranteed to be as described
• Can be returned for flaws or malfunctions that were not disclosed
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.