Festo ELGS-TB-KF-45-200-ST-M-H1-PLK-AA Toothed Belt Axis Unit

Manufacturer: Festo

Model: ELGS-TB-KF-45-200-ST-M-H1-PLK-AA

Condition: Used. This Toothed Belt Axis Unit is in good cosmetic condition with only minor scuffs and scratches from regular industrial use and comes in non-original packaging. The photos show the exact item(s) the buyer will receive.

Notes: No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1)  Festo ELGS-TB-KF-45-200-ST-M-H1-PLK-AA Toothed Belt Axis Unit

Specifications:

• Manufacturer:  Festo
• Model:  ELGS-TB-KF-45-200-ST-M-H1-PLK-AA
• Description:  Toothed Belt Axis Unit
  • Drive pinion effective diameter 19.1 mm
  • Working stroke 200 mm
  • Size 45
  • Stroke reserve 0 mm
  • Toothed belt elongation 0.187 %
  • Toothed belt pitch 2 mm
  • Mounting position Horizontal
  • Guide Recirculating ball bearing guide
  • Structural design - Electromechanical linear axis - with a toothed belt, With integrated drive,
  • Motor type Stepper motor
  • Symbol 00997293
  • Position sensing - Motor encoder - For proximity sensor
  • Homing - Fixed stop block positive - Fixed stop block, negative
  • Rotor position sensor - Absolute encoder, single-turn
  • Rotor position sensor measuring principle - Magnetic
  • Temperature monitoring - Shutdown in the event of over temperature - Integrated precise CMOS temperature sensor with analog output
  • Additional functions - User interface - Integrated end-position sensing
  • Display - LED
  • Ready status indication - LED
  • Max. acceleration - 6 m/s²
  • Max. speed - 0.96 m/s
  • Repetition accuracy - ±0.1 mm
  • Characteristics of digital logic outputs -Configurable - Not galvanically isolated
  • Duty cycle - 100%
  • Insulation protection class - B
  • Max. current of digital logic outputs - 100 mA
  • Max. current consumption - 5300 mA
  • DC nominal voltage -24 V
  • Nominal current - 5.3 A
  • Parameterization interface - IO-Link® - User interface
  • Rotor position sensor resolution - 16 bit
  • Permissible voltage fluctuations -+/- 15 %
  • Power supply, type of connection -Plug
  • Power supply, connection technology
  • M12x1, T-coded as per EN 61076-2-111
  • Power supply, number of pins/wires -4
  • Power supply, connection pattern -00995989
  • Certification - RCM compliance mark
  • KC characters - KC EMC
  • CE marking (see declaration of conformity) - As per EU EMC directive - As per EU RoHS directive
  • UKCA marking (see declaration of conformity) - To UK instructions for EMC - To UK RoHS instructions
  • Vibration resistance - Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
  • Shock resistance - Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
  • LABS (PWIS) conformity - VDMA24364 zone III
  • Storage temperature - -20 °C ... 60 °C
  • Relative air humidity - 0 - 90 %
  • Degree of protection - IP40
  • Protection class - III
  • Ambient temperature - 0 °C ... 50 °C
  • Note on ambient temperature - Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
  • 2nd moment of area Iy - 140000 mm4
  • 2nd moment of area Iz - 170000 mm4
  • Max. force Fy - 300 N
  • Max. force Fz - 600 N
  • Max. torque Mx - 5.5 Nm
  • Max. torque My - 4.7 Nm
  • Max. torque Mz - 4.7 Nm
  • Max. feed force Fx - 75 N
  • Guide value for payload, horizontal - 2.5 kg
  • Torsion moment of inertia It - 8500 mm4
  • Feed constant - 60 mm/U
  • Moving mass - 169 g
  • Moving mass at 0 mm stroke - 169 g
  • Slide weight - 55 g
  • Product weight - 2250 g
  • Number of digital logic outputs 24 V DC - 2
  • Number of digital logic inputs - 2
  • Logic input specification - Based on IEC 61131-2, type 1
  • Work range of logic input - 24 V
  • IO-Link®, SIO mode support - Yes
  • Characteristics of logic input - Configurable - Not galvanically isolated
  • IO-Link®, protocol version - Device V 1.1
  • IO-Link®, communication mode - COM3 (230.4 kBd)
  • IO-Link®, port class - A
  • IO-Link®, number of ports - 1
  • IO-Link®, process data width OUT - 2 Byte
  • IO-Link®, process data content OUT - 1 bit (move in) - 1 bit (move out) - 1 bit (quit error)
  • IO-Link®, process data width IN - 2 Byte
  • IO-Link®, process data content IN - 1 bit (state device) - 1 bit (state move) - 1 bit (state in) - 1 bit (state out)
  • IO-Link®, service data contents IN - 32-bit force - 32-bit position - 32-bit speed
  • IO-Link®, minimum cycle time - 1 ms
  • IO-Link®, data memory required - 500 byte
  • Max. cable length - 15 m outputs - 15 m inputs - 20 m for IO-Link® operation
  • Switching logic at outputs - PNP (positive switching)
  • Input switching logic - PNP (positive switching)
  • IO-Link®, Connection technology - Plug
  • Logic interface, connection type - Plug
  • Logic interface, connection technology - M12x1, A-coded as per EN 61076-2-101
  • Logic interface, number of poles/wires - 8
  • Logic interface, connection pattern - 00992264
  • Material of end caps - Die cast aluminum, painted
  • Profile material - Wrought aluminum alloy, anodized
  • Note on materials - RoHS-compliant
  • Cover strip material - Stainless steel strip
  • Drive cover material - Die cast aluminum, painted
  • Slide carriage material - Tempered steel
  • Guide rail material - Tempered steel
  • Belt pulley material - High-alloy stainless steel
  • Slide material - Die-cast aluminum
  • Toothed belt material - Polychloroprene with glass fiber
  • (1)  Festo ELGC-TB-KF-45-200 Belt Driven Linear Actuator
  • (1)  Festo EAMM-A-V32-57A Axial Kit
  • (1)  Festo EMCS-ST-57-M-1-M-H1-AA Servo Motor

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.