Kurt CT4D4 4x 4"Double Dual Vise Tower/Tombstone Mill Machinist Horizontal-Parts

Manufacturer: Kurt

Model: CT4D4

Condition: For Parts or Not Working. Comes in non-original packaging. This tombstone is in Fair cosmetic condition with lots of minor blemishes from prior use. There are small dings dents all over, as well as a few "oops" spots from milling operations.   We removed most of it, but there is still some residue from the coolant and a few chips in the nooks and crannies. The bottom of the mounting adapter looks like it has some surface rust, and some places where it was ground on the bottom corner.  The majority of what looks like rust on the tombstone is old (brown) coolant residues.  The jaw plates, and the bolts holding them to jaws, are not all the same type.  A few setscrews on movable jaws were broken, and not all of them could be removed with hand tools we have available.  Two were replaced with bolts, which work but restrict travel of the bottom jaws.  One of the vises has a different style of top clamp and nuts.  Several seals are damaged or missing.   The two bottom pins shown in the bottom plate are stuck. The photos show the exact item(s) the buyer will receive.

Notes: This lot is in PARTIAL working condition.  The previous owner did not keep up with proper maintenance, and the vises still worked for them - barely.  With the shown stationary jaws, the vises will not all close.  With the stationary jaws removed, none of the movable jaws come anywhere close to closing, and they all close to different widths as shown.  Three of the screws are noticeably bent, one so badly it causes a hesitation on each rotation.  On two vises, the moving jaws take turns moving (not good).  These were used in a very small range of motion for holding specific workpieces, and only that range works well.  The rest of the range, opening and closing, requires variable force that gets unreasonably difficult to turn at the middle and ends of travel.

Photos 2, 3, and 4 show maximum opening of all vises, maximum closing without stationary jaws, and maximum closing with the included stationary jaws.

These vises will need to be rebuilt and possibly repaired.  We are not sure if parts are available or at what cost if they are available.  They are being sold AS-IS. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Kurt CT4D4 Vise Tower
• (2) Bottom adapters for spindle or pin mounting

Specifications:

• Manufacturer: Kurt
• Model: CT4D4
• Vise cluster tower (tombstone)
• (4) 4" Dual workholding vises (8 workholding locations total)
• 21 cm diameter round base
• Ideal for clamping parts of the same or dissimilar sizes
• Stationary center jaw is removable for larger capacity
• Manual operation
• Replaceable hard steel jaws
• Replaceable jaw plates
• 2" round nose spindle fits your horizontal support if necessary
• Overall height with adapter: About 21"
• NOT working properly!  Sold AS-IS!

AS-IS

• No returns - No refunds - No exchanges
• By purchasing this item, you are agreeing to not seek reimbursement should the item not function to the manufacturer's specifications.
• Read the notes carefully to ensure you are buying something you can use
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.