Marlow SE5020-02 Temperature Controller / Power Supply 99.9°-150°C / 192W Max

Manufacturer: Marlow

Model: SE5020-02

Condition: Used. This controller is in good cosmetic condition with minor scuffs and scratches from regular industrial use and comes in non-original packaging.
The photos show the exact item(s) the buyer will receive.

Notes: We powered on this controller to observe the bright LED display bright, clear, and responsive to the control buttons. After connecting the output leads to a Peltier we checked the voltage output to up to 25VDC which came down as it tried to control the temperature.  We were able to adjust the temperature from cold to hot and observed the controller working to meet those set points.  The Amp/Volt toggle switch and the Amp/Volts readout displayed strange outputs until we jiggled the toggle switch at which point the reading matched out multi-meter.  We suspect the toggle switch is problematic but functional and have provided photos of it displaying properly and improperly.  No additional testing was performed.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Marlow SE5020-02 Temperature Controller / Power Supply

Specifications:

• Manufacturer: Marlow T
• Model: SE5020-02
• Description: Temperature Controller / Power Supply
  • Temperature Control Range:  -99.9°C to 150°C
  • Control Stability:  ±0.1°C (typical)
  • Ramp Rate Range:  0.01°/min. to 99.99°/min
  • Control Mode:  PID & PID ramp-to-setpoint
  • Linearization Accuracy:  0.1°C for thermistor, 0.2°C for thermocouple
  • Calibration Accuracy:  0.5°C
  • Power Supply Output Stage:  Linear bipolar
  • Ripple and Noise:  Less than 10 mA rms
  • Voltage/Current Readout Accuracy:  1% of reading plus two digits
  • Operating Temperature:  0°C to 50°C
  • Storage Temperature:  -10°C to 50°C
  • AC Input Power:  104-125/208-250 Vac, 48-62 Hz
  • Output Power:  192 W max
  • Output Current:  0 to ± 12 Adc
  • Output Voltage:  0 to ± 16 Vdc at 12A
  • Compliance:  to ± 21 Vdc at 1 A
  • 115 VAC Input Current:  4.8 A max
  • 230 VAC Input Current:  2.4 A max
  • Dimensions:  5.22” h x 8.38” w x 16.0” D / (13.3 cm h x 21.3 cm w x 40.6 cm d)
  • Weight:  30 lbs (13.64 kg)

Hassle Free Returns

• DougDeals will pay return shipping if the item needs to be returned for any reason
• Return window is 30 days from delivery date
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.