Microscan FIS-6300-0003G Fixed Barcode Scanner w/ Power Supply and Extras

Manufacturer: Microscan Systems

Model: FIS-6300-0003G

Condition: Used. This Barcode Scanner, Power Supply, Interface Module, and Auto Adapter are in good cosmetic condition with scuffs and scratches from regular industrial use and storage.  Comes in non-original packaging. The photos show the exact item(s) the buyer will receive.

Notes: We connected all of these assembled parts and plugged in the power supply to observe the scanner go through a startup where it flashed multiple times over a period of a minute or so and then rested.  The green power indicator stays lit.  No additional testing was performed. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1)  Microscan FIS-6300-0003G Fixed Barcode Scanner
• (1)  Microscan AD60W1P-310B Power Supply
• (1)  Microscan IB-131 Interface Module 99-400005-02 Scanner / Host / Network / Power / Trigger
• (1)  Microscan IC-332 Auto ID Adapter

Specifications:

• Manufacturer:  Microscan
• Model:  FIS-6300-0003G / AD60W1P-310B / IB-131 / IC-332
• Description:  Fixed Barcode Scanner w/ Power Supply and Extras
  • (1)  Microscan FIS-6300-0003G Fixed Barcode Scanner
    • 1” (25.2 mm) height x 1.8” (45.7 mm) width x 2.10” (53.3 mm) length
    • High-resolution zero-distortion optics, diffractive full field illumination, and a wide scan window allow linear and 2D codes as large as 2” (50.8 mm) square to be read as close as one inch (25.4 mm)
    • Enclosure: IP54
    • SYMBOLOGY TYPES 2D Symbologies: Data Matrix  (ECC 0-200), QR Code Stacked Symbologies: PDF417, Micro PDF417, RSS (Composite & Stacked) Linear Bar Codes: Code 39, Code 128, BC 412, I2 of 5, Pharmacode, UPC/EAN, Codabar, Code 93
    • READ PARAMETERS Pitch: ±30°  Skew: ±30°  Tilt: 360° Decode Rate: Up to 10 decodes per second Focal Range: 2 to 6” (50.8 to 152.4 mm) (autofocus)
    • INDICATORS LEDS: Read Performance, Power, Read Status Green Flash: Good read  Blue V: Symbol locator Beeper: Good read, match/mismatch, no read, serial command confirmation, on/off COMMUNICATION PROTOCOLS Standard Interface: RS-232, RS-422 ELECTRICAL Power: 5 VDC +/– 5 %, 200 mV p-p max. ripple, 440 mA @ 5 VDC (typ.)
  • (1)  Microscan AD60W1P-310B Power Supply
    • Input
      • AC100-240V 50/60Hz 1.5A
    • Output
      • 24V 2.0A SN-1057A
  • (1)  Microscan IB-131 Interface Module 99-400005-02 Scanner / Host / Network / Power / Trigger
    • ELECTRICAL Input Power Requirements: 10–28VDC, 200mV p–p max ripple, 54 mA & 9 mA @ 24VDC (typ.) (scanner and IC-332)
    • DISCRETE I/O Trigger Input: Optoisolated, 5–28V rated (23mA at 24VDC)
    • New Master Input: Optoisolated, 5-28V rated (23mA at 24VDC), New Master (–) to signal ground
    • Outputs (1,2,3): Optoisolated, 1-28V rated,(Ice<100mA max, must be limited by user)
    • CE MARK General Immunity: EN 55024: 1998 ITE  Immunity  
    • Standard Radiated and Conducted Emissions: EN 55022: 1998 ITE Disturbances
  • (1)  Microscan IC-332 Auto ID Adapter
    • The IC-332 allows the barcode reader to be  connected to the IB-131
    • The IC-332 provides 5-VDC for the barcode reader from the 10-28 VDC power which is connected to the IB-131
    • The IC-332 provides optoisolation for the trigger input and  programmable outputs of the barcode reader

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.