Powerlase Starlase A04 400 Watts Pulsed Laser System with Power supplies, Cables

Manufacturer: Powerlase

Model: A04

Condition: Used. This lot is in Fair cosmetic condition with minor blemishes from prior use.  There are scuffs/scratches in the paint on the laser head, and one of the Dsub connectors on the head is loose/not attached to the back end of the laser.  The top panel of the control box is loose.  We are not sure what-all cables are included, but at least the thick DC power cables and the signal pigtails to the laser head are present.  Not everything was labeled with an obvious function and some unnecessary cables may be present.  The cables to the shutter are cut.  We do NOT have any software or passwords if any are required.  The manuals for the Exitech system are also included in case you have a use for them.

Please NOTE: Not all the cables and components are included!  This system was broken up and some of the cables as well as the chiller and control computer went away separately. The photos show the exact item(s) the buyer will receive.

Notes: This lot was formerly a part of an Exitech M9000 Terablater that we saw working before it was disassembled.  No separate testing was done. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Powerlase A04 Laser
• (2) Powerlase DC power supplies
• (1) Powerlase 350-0026-1 Control Box
• (1) NEOS 29027-100DSPPK RF Driver
• (1) Shutter with thick copper 'blade' element
• (1) Pile of assorted cables
• (1) Laser product manual (not shown)

Specifications:

• Manufacturer: Powerlase
• Model: A04
• P/N: 201-0010-1
• Starlase A04 400+ Watts diode-pumped Acousto-Optic switched LASER
• Wavelength: 1064nm
• Water cooled apertures
• PARTIAL system, not reaty to run without expert system integration!
• Regulatory maximum labeling: Maximum pulse energy: 53m J, 450 watts
• Full complement of diagnostic sensors including:
  • Coolant temperature, leak, and flow
  • humidity
  • AOM failure alarms
  • Internal power monitor
• Raw beam diameter: 2mm
• Max. pulse energy: 53mJ
• Max. pulse Av. Power: 420W
• Pulse duration: 35-200ns
• Repetition rate: 3kHz to 50kHz
• Pulse duration: 35 to 200nS
• Drive current: 48A (nominal)
• Peak power: up to 1.63MW
• Requires 460 Volts 9kVA 3phase electrical power, compressed air and cooling water
• Last ran in 2017

AS-IS

• No returns - No refunds - No exchanges
• By purchasing this item, you are agreeing to not seek reimbursement should the item not function to the manufacturer's specifications.
• Read the notes carefully to ensure you are buying something you can use
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.