Roto-Finish ST-4BCLT Vibratory Finisher 4 cu.ft.

Watch Video

Video will open in a new window
Using the eBay App? Paste link into a browser window:

[isdntekvideo]

Manufacturer: Roto-Finish

Model: ST-4BCLT

Condition: Used. This machine is in Fair cosmetic condition.  The controls have been extensively modified, consisting now mainly of a pushbutton selectable timer and an on/off switch.  There are residues from use and corrosion all over, including flaking rust in the settling tank area.  The tank has caps on its hose fittings; apparently the previous owner did not have water flowing through the tank.  There are no exit funnels or chutes on the drains, so either they were using this dry or they were making an enormous wet mess in their facility, we are not sure which - but if you run this wet, you may want to install some chutes under the drains!  There is no exit chute for the product either, so you will need to reach into the (very large) cut-out in the side, or install your own drying chute.  The motor has no dataplate.  It looks about the right size for a 2 horsepower motor, and the leads look like it could be rewired for 460V but we are not certain.  The door doesn't have any hardware to hold it closed, so it opens when the machine runs.  The door to the control cabinet has no latch either, but it stays closed-ish.  There is no plug on the main input cable.  The dataplate is very damaged and hard to read.
The photos show the exact item(s) the buyer will receive.

Notes: This machine is in good working condition.  When the timer has a duration selected and the switch is on, the motor runs.  It is rather loud.  Turning off the switch or timer turns off the machine.  No other testing was done.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Roto-Finish ST-4BCLT Vibratory Finisher

Specifications:

• Manufacturer: Roto-Finish
• Model: ST-4BCLT X-1
• Description: Vibratory Finisher
  • Tumble your parts in abrasive media
  • Curved wall, 44" outside/42" rim inside diameter
  • Settling tank with 2" inlet/outlet fittings
  • Timer has 2, 4, 8, 12 hour and OFF selections
  • Wired for 208/230V AC 3phase
  • Electronics have been altered from original condition (see photo)
  • Spray nozzle mounted on top of outside rim
  • Drains are open (could be closed, but the parts are gone)

30 Day Guarantee

• Guaranteed to be as described
• Can be returned for flaws or malfunctions that were not disclosed
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.