RW&D 636 Tox Air-Over-Hydraulic Press 40kN 4 Tons Works-ish

Manufacturer: RW&D Machine and Engineering RWD

Model: 636

Condition: For Parts or Not Working. This press has lots of minor blemishes from use. There are scuffs/scratches and adhesive label residues here and there all over. Something has been unbolted from behind the press in the working area, but we are not sure what that was.  The wiring in the control electronics enclosure has been opened; we are not sure if it was tampered with. The photos show the exact item(s) the buyer will receive.

Notes: This press is in PARTIAL working condition.  The National Instruments software has an expired license, and we are not sure if that is related to the error we found.  When the press first starts, the Crimp Press app loads and gives an error immediately: "The following error occurred: VISA Clear in CrimpStation.vi At sequence: INIT OpenCOMPorts" we are not sure what this means. When Resume is pressed, the alarm sounds and the software closes itself.  The very good news is: both the top and bottom air cylinders raise and lower when air is applied to their ports. The barcode scanner scans. The laser distance sensors sense. The pneumatic pressure sensor shows a reading. The touch screen responds to touch inputs.  No other testing was done.

This machine WILL NOT initialize its software properly. We are confident it is able to function as a pneumatic press. We are not able to support the software at all, sorry! No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) RW&D 636 4-ton Press
• (1) Operations Manual

Specifications:

• Manufacturer: RW&D Machine & Engineering, Inc.
• Model: 636 Lid Crimp Cell
• Air-over-hydraulic press
• 4-post press
• Capacity: to 40kN / 4 tons @ 10 bar air pressure
• Facility requirements: 120V 60Hz 1phase 10A and Compressed Air
• Press post thickness: 44mm
• Press plate thickness: 45mm top, 48mm bottom
• Press plate size: 24" x 14"
• Area between posts: 19" x 8"
• Top press plate frame: 31 and 25mm thick plate steel
• Operated by Windows PC using National Instruments interface (please read test notes!)
• 19" Color Touchscreen LCD display
• (2) Emergency Stop switches
• Visual and audible alarm stack tower on top
• Keyence SL-V28HM-T safety light curtain
• Microscan FIS-6300-5001G Mini Hawk barcode reader
• Upper press plate driven by Tox Pressotechnik Kraft-Paket cylinder
• Lower press plate has a regular pneumatic cylinder to lift fixtures
• Tox cylinder type: S 04.00.300.440.US
• Total stroke: 300mm
• Power stroke: 44mm
• Maximum pressure input: 10 bar

AS-IS

• No returns - No refunds - No exchanges
• By purchasing this item, you are agreeing to not seek reimbursement should the item not function to the manufacturer's specifications.
• Read the notes carefully to ensure you are buying something you can use
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.