Teknic TG-540-2-0-5 ControlPoint Networked, Servo/Stepper Trajectory Generator

Manufacturer: Teknic

Model: TG-540-2-0-5

Condition: Used. Comes in non-original packaging. This unit is in very good cosmetic condition with a few minor scuffs and scratches from normal use, but nothing major or anything that would affect function. The photos show the exact item(s) the buyer will receive.

Notes: This unit was pulled from a working setup that was being decommissioned, but was not tested separately after removal. No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Teknic TG-540-2-0-5 ControlPoint Networked, Servo/Stepper Trajectory Generator

Specifications:

• Manufacturer: Teknic Inc.
• Model: TG-540-2-0-5
• Description: Networked, Servo/Stepper Trajectory Generator
  • Dedicated Interface Inputs:
    • 1. Ready (confirms drive is not shut down).
    • 2. Move done, In Acceptable Tracking Range, or All Systems Go (meaning of mode depends on drive set-up).
  • Dedicated Interface Outputs:
    • 1. Enable (turns on/off drive power stage).
    • 2. Mode (engages/disengages a variety of drive features, such as torque foldback, hardstop homing, etc.).
    • 3. Digital Pulse and Direction (position vs. time command to digital servo or stepper).
  • Dedicated Interface Limits: 5 to 24V, courtesy wired to drive connector
  • Digital trajectory range:
    • Velocity: 1hz to 7.4 MHz (steps/sec).
    • Acceleration: 233 to 3.124E10 (steps/sec²)

Hassle Free Returns

• DougDeals will pay return shipping if the item needs to be returned for any reason
• Return window is 30 days from delivery date
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.