Tektronix DSA8200 Digital Serial Analyzer Sampling Oscilloscope Standard Config.

Manufacturer: Tektronix

Model: DSA8200

Condition: Used. Comes in non-original packaging.  This analyzer is in fair cosmetic condition, with a few very small scratches on the display that don't show up in use (or in pictures), and a ding in the plastic near the display.  There are also a few heavy white scuffs/scratches on the top.
The photos show the exact item(s) the buyer will receive.

Notes: This analyzer is in mostly-working condition as far as we can test, except for a dead CMOS battery.  At first power-on, the computer gave a "CMOS checksum error - Defaults loaded, Press F1 to continue".  This is not a problem after the first reset if you don't pull out the power cable.  We don't have any input modules for complete testing.  We found this analyzer boots and successfully loads the DSA8200 software without errors.  The touchscreen and buttons responded to user inputs.  We were able to start DiffChanAlign and DSA8200 software, but the 80SJNB Jitter, Noise, and BER analysis needs a module we don't have.  We are not sure what the status is of any licensing of the software.  No other testing was done.
No manuals, cords/cables, or additional items are included if not listed or shown.

Included:

• (1) Tek DSA8200 DSA

Specifications:

• Manufacturer: Tektronix
• Model: DSA8200
• Digital Serial Analyzer
• Requires input modules
• Bandwidth to 80GHz (depends on modules)
• Touchscreen color LCD
• Based on a Windows XP Embedded PC
• Without any input modules
• Power requirement: 100-240V 50-60Hz or 115V 400Hz, 600 Watts maximum

30 Day Guarantee

• Guaranteed to be as described
• Can be returned for flaws or malfunctions that were not disclosed
• See complete terms

CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.