Description
Manufacturer: Vibromatic
Model: 10" Bowl Feeder
Condition: Used. This system is in Fair cosmetic condition with minor wear/scuffs/scratches from prior use. Several bolt heads have minor corrosion.
The photos show the exact item(s) the buyer will receive.
Notes: This is in Good working condition. The bowl and hopper both vibrate according to the speed set on the controller. When either sensor is obstructed, the corresponding electromagnet drives stop feeding. We found the Q45VR3FQ's optical fiber a little tricky to align, but once bolted in place it is very steady. No other testing was done.
No manuals, cords/cables, or additional items are included if not listed or shown.
Included:
- (1) Vibromatic 10" Vibratory Bowl Feeder with Hopper and Drive Control
Specifications:
- Manufacturer: Vibromatic
- Model: V-600-8727
- Vibratory bowl feeder with bulk hopper and adjustable-speed drive controller
- 10" bowl size
- VERY heavy table, approximately 22" x 18" x 1.25" thick steel plate
- Adjustable speed
-
Vibratory feeder:
- 10" bowl made for feeding a 1/2" diameter, very thin nut
- Vibromatic sells new/custom bowls for your application if necessary
- Automatically shuts off if the outfeed chute is blocked
- Drive unit appears to be WLPS-9 type
- 2 electromagnetic coils
- Uses Banner Q45VR3FQ to sense chute obstructions
-
Bulk hopper
- Feed from your bulk source when you need more parts than feeder can hold
- Level control stops hopper when feeder has acceptable level of parts
- Drops parts onto soft sheet, not hard bowl
- Uses Banner Q60VR3AFV1000Q1 for level sensing in the bowl
-
Controller model H002
- Independent power and speed controls for hopper and feeder
- Replaces 2G-1R and 2G-2R
- 120VAC power
30 Day Guarantee
- Guaranteed to be as described
- Can be returned for flaws or malfunctions that were not disclosed
- See complete terms
CDN Systems LLC, DBA Doug Deals, is not an authorized distributor or affiliated with the manufacturer of this product. Original manufacturer's warranty does not apply.